QPDM-1605 DVR Qpix

16 Channel Input & 5 Monitor Output Digital Matrix.

16Cameras x16 DVRs = 256 cameras

Each Input Channel could be 4Ch or 8ch or 16Ch max.

Supports 1 Main Monitor & 4 Call monitor

Main Monitor Displays all 256 Cameras in one screen

Optional 1 VGA Output

1 S-Video Output

Auto sequential switching by variable Dwell time

1/4/6/9/13/16 split PIP

Only one Main Monitor Video cable to be wired from every DVR to Matrix (16 x 1 = 16 cables+1 Data cable)

Serial all Data Cable of DVRs to Matrix to control

Matrix Supports Qpix DVRs only

Control Matrix,DVRs & PTZ cameras (connected to DVRs) through Qpix 3D Joystick Keyboard Model.:QPDK-CTL1 (any number of DVRs can be connected)

3 matrix Units can be connected in 1 group (3Matrix x 256 Cameras = 768 cameras)

Additional QPDM-1605 can be connected to the Call monitor O/p of same 16 DVRs/Matrix (Therefore 3 Main Matrix & 3 Call Matrix in 1 group)

Brand Model		QPDM-1605
Display Input		1 Vp-p with Composite Video Signal (2 Vp-p : if 75 ohms is set off) Input of NTSC, PAL Available BNC Jack Input
Screen Display		1 Vp-p 75 ohms Composite Video Signal BNC Jack Input Analouge non-interlaced RGB. Compatible with TFT LCD Monitor that support 50Hz VGA mode in PAL
Alarm Input		16 Channel, 5V TTL Level 10K ohms Pull-up
Alarm Output		Relay Contact Capability - AC 125V 2A / AC 250V 1A
Power Input Voltage		12 V / 6.67A (DC)
Power Consumption		12 W
Operating Temperature		0°C - 50°C
Dimensions		420W x 44H x 335D mm (16.54W x 1.73H x 13.19D inch)
Weight		3.5 Kg
Connector Type
Power		DC Jack
Alarm In		Terminal Block
Alarm Out		Terminal Block
Camera In / Out		BNC
VCR In / Out		BNC
Monitor Out		BNC
RS-232C		9 Pin D-Sub
VGA Out		15 Pin D-Sub
Display
Main Monitor		1, Displays All 256 cameras in 1 Screen
Call Monitor		4, Dispaly 64 Cameras/screen, Switchable
Resolution		Full-Screen Forrmat 720x480(NTSC), 720x576(PAL) QUAD Format 360x240(NTSC), 360x288(PAL) PIP Insert 180x120(NTSC), 180x144(PAL)

Download QPDM-1605

PDF

Specification